|
«« back on Patton
 | Patton SmartNode 1400 |  |
|
|
Patton SmartNode 1400
ISDN/BRI VoIP Gateway (4 channels)
Allowing the small office/remote office to lower communication costs over any IP link, the SmartNode 1400 Multiport BRI VoIP Media Gateway provides four voice-over connections with QoS for transparent voice, fax, and data calls.
Features & Benefits
VoIP Dual Ethernet router, 4-channel ISDN BRI gateway
LAN-to-LAN connectivity
Voice VPNs
Real-time quality of service (TOS, Diffserv, and IEEE 802.1p/Q)
On-board DSP support multiple voice codecs
G.711 A-Law/µ-Law; G.723.1 (at 5.3 or 6.3 kbit/s); G.729A; Transparent
Euro ISDN EDSS-1/ETSI BRI/NET3
H.323v4, SIPv2, and MGCP/IUA
Simultaneous compresses 4 ISDN voice calls
Static firewall with NAPT and Access Control Lists
Industry standard CLI, SNMP, TFTP configuration and software upgradeable
EMC & CE compliant
1-year warranty
Optional Upgrade: 2-5 year Warranty
Optional Upgrade: 1-5 year Enhanced Warranty (includes free Advance Replacements)
The SmartNode 1400 Multiport BRI VoIP Media Gateway combines voice and data with QoS routing and call swtiching to provide private voice PBX networking and PBX extension. Supporting four simultaenous calls from the IP network or the PSTN, the SN1400 allows any small/remote office to use an existing IP network for lower-cost voice and data communications.
T.38 fax, fax bypass, and modem bypass capabilities ensure that the SN1400 will seamlessly connect to all voice and data, and PBX networking services. With H.323, SIP, and MGCP/IUA protocol support, the SN1400 offers multiple user-defined G.711 and G.726 voice codecs as well as G.723 and G.729ab for low bandwidth voice. With Patton's ToIP™ call routing technology and selectable NT/TE interfaces, the SN1400 extends any standard ISDN telephone or PBX-to-PBX with VoIP.
The SmartNode's flexible programming interface combines a real-time Quality-of-Service IP router with advanced network features. With NAT, DHCP, PPPoE, and Access Control Lists/Firewall, the SN1400 connects your LAN to the WAN without the cost of extra equipment. Using its built-in QoS feature delivers the highest quality of voice every time-all the time.
Configuration Example: Remote Office Connectivity and Pass-Through
In enterprise networks, the SmartNode integrates ISDN telephony and IP data communications for best use of bandwidth, improved office-to-office communication, and reduced network costs.
Instead of installing a separate PBX in a remote office, the SmartNode is able to provide transparent extension of PBX phones. The extension can be managed centrally and benefit from PBX services such as calling groups, least cost routing, and call forwarding.
Specifications
Voice Connectivity
2 ISDN BRI/So (S/T), RJ-45
Both ports configurable for TE or NT
4 VoIP sessions
Configurable point-to-point, point-to-multipoint and connector pinout
Cut-through relay for emergency operation (life line support)
IP Routing
IPv4 router
RIPv1, v2 (RFC 1058 and 2453)
Programmable static routes
ICMP redirect (RFC 792)
Packet fragmentation
DHCP client/server
Static Firewall
NAPT (RFC 1631)
NAT/DAT
Access control list
Data Connectivity
2 10Base-T Ethernet, RJ-45
PPPoE
IP Quality of Services
WFQ/Fixed Rate/Priority Queuing/flow-split scheduler
Combination of QoS schemes with configurable burst
DiffServe/ToS set or queue per header bits
Pocket Policing discards excess traffic
802.1p VLAN tagging
Traffic classification and shaping
Voice Processing
Voice codes
o G.711 A-Law/µ-Law (64kbps)
o G.726 (ADPCM 40, 32, 24, 16 kpbs)
o G.723.1 (5.3 or 6.3 kbps)
o G.729ab (8kbps) Transparent pass through
G.168 echo cancellation
4 parallel voice connections
DTMF detection and generation
Carrier tone detection and generation
Silence suppression and comfort noise
Configurable dejitter buffer
Configurable tones (dial, ringing, busy)
Configurable transmit packet length
RTP/RTCP (RFC 1889)
Management
Industry standard CLI with local console (CRJ-45, RS-232) and remote Telnet access
TFTP configuration down-and upload
TFTP firmware download
SNMP v1 agent (MIB II and private MIB)
Built-in diagnostic tools (trace, debug)
Autoated provisioning for configuration and firmware
HTTP GUI
Fax and Modem Support
Fax over IP
T.38 Fax relay (9.6 k, 14.4 k)
G.711 Fax and Modem Bypass
Operating Environment
Operating temperature: 0-40°C
Operating humidity: 5-80% (non condensing)
Voice Signalling
Euro ISDN EDSS-1 / ETSI BRI/NET3
ETS 300 012-1 (ITU-T I.430)
ETS 300 402-1 (ITU-T Q.921)
ETS 300 403-1/2 (ITU-T Q.931)
ETS 300 102-1 (ITU-T Q.931)
Q-SIG (PSS-1)
ECMA-143
ETSI and ISO/ECMA channel numbering
H.323v4
RAS, H.225, H.245
Fast-connect, early H.245
Gatekeeper autodiscovery
Alias registration
Overlap sending
Empty capability set (call transfer, hold)
H.323v1 call transfer, hold
ECS support
SIPv2
MGCP/IUA
System
CPU Motorola MPC850 at 50 MHz
Memory 16MB SDRAM/4MB Flash
Power: 100-240 VAC (50/60 Hz)
Power dissipation 4W
Voice Routing-Session Router™
Local switching
Interface huntgroups
ISDN broadcast message routing
Routing Criteria
Interface
Calling/called party number
Time of day, day of week, date
ISDN bearer capability
Number manipulation functions
Replace numbers
Add/remove digits
Multiple remote gateways
PLAR
Compliance
EMC compliance: EN55022 and EN55024
Safety compliance: EN 50950
CE compliance
FCC Part 15 Class A
* Patton Hardware List »»
* Voip Hardware List »»
|
|
|
 |
Advertisement |
|
